Conformance Test Report
IEC 61851-1, DIN 70121 and ISO 15118 (SLAC & V2G message) test cases — SECC under test (VTB)
Report generated: 2026-10-11 08:00:25
Overall: FAIL
System Under Test
| Manufacturer | - |
|---|---|
| Model / type | - |
| Software / firmware | EVerest testing/main @ 2e710bc8191bd5a29c16a4d0815c6bcd9318c51d |
| Serial / identification | - |
| Notes | Nightly CI, all SECC stacks Evse15118D20. SUT config: config-test-conformance-dc-full-ocpp.yaml (one of the nightly's rig cycles, each with its own report) |
| Transfer mode | DC |
Black-box DUT: the internal software stack is not observable by the test system; the identification above was entered by the test operator.
Declared capability profile (PICS/PIXIT)
| Capability | PICS/PIXIT | Declared |
|---|---|---|
| Energy transfer mode | PICS_CMN_CMN_ChargingMode | dc |
| Payment options offered | PIXIT_SECC_CMN_PaymentOption / PICS_CMN_CMN_IdentificationMode | ExternalPayment, Contract |
| Certificate services offered | PIXIT_SECC_CMN_CertificateHandling | Install, Update |
| Certificate validity checked against current time | PICS_SECC_CertificateValidationCheck | yes |
| Tester CSMS is the DUT's OCPP backend | PIXIT_SECC_TesterCSMS | yes |
| Transport security accepted | PIXIT_SECC_CMN_TLS | tcp, tls |
| Value-added service list (VAS) | PIXIT_SECC_CMN_VAS == serviceDetail / PICS_SECC_VAS | no |
| Internet access service | PIXIT_SECC_CMN_InternetAccess == internetAccess | no |
| Metering receipts requested | PIXIT_SECC_CMN_ReceiptRequired | yes |
| MeterInfo in charge-loop responses | PIXIT_SECC_CMN_MeterInfo == meterInfo | yes |
| MeteringConfirmation requested (ISO 15118-20) | PICS_CMN_MeteringConfirmationRequested | no |
| SalesTariff in schedules | PIXIT_SECC_CMN_SalesTariff == salesTariff | no |
| Control modes offered (ISO 15118-20) | PICS_CMN_ControlMode | Dynamic, Scheduled |
| Schedule initially unavailable (ISO 15118-20) | PIXIT_SECC_ScheduleRetrievalSuspended | no |
| DepartureTime considered | PICS_SECC_CMN_DepartureTime | yes |
| MaxEntriesSAScheduleTuple considered | PICS_SECC_CMN_MaxEntriesSAScheduleTuple | yes |
| Renegotiation supported | PICS_CMN_CMN_Renegotiation | no |
| CP State D (ventilation) during charging | PICS_SECC_CMN_EvStateInChargeProgress == D | no |
| Pause / resume supported | PICS_SECC_CMN_Pause | no |
| Welding detection supported | PICS_SECC_DC_WeldingDetection | yes |
| ISO 15118-2 supported | PICS_SECC_CMN_ISO15118_2 | yes |
| ISO 15118-20 supported | PICS_SECC_CMN_ISO15118_20 | yes |
| DIN SPEC 70121 supported (DC) | PICS_SECC_DC_DIN70121 | yes |
| DC energy transfer mode(s) advertised | PIXIT_SECC_DC_SupportedEnergyTransferMode | DC_extended |
| CableCheck answers Ongoing | PIXIT_SECC_DC_CableCheckOngoing == ongoing | yes |
| Authorization answers Ongoing | PIXIT_SECC_CMN_AuthorizationOngoing == ongoing | no |
| ChargeParameterDiscovery answers Ongoing | PIXIT_SECC_CMN_ChargeParameterDiscoveryOngoing == ongoing | no |
| CM_VALIDATE (BCB-toggle validation) | PIXIT_SECC_CMN_CmValidate == cmValidate | no |
| Architecture makes validation unnecessary | PIXIT_SECC_CMN_ArchitectureValidationNotRequired | no |
| CM_AMP_MAP supported | PIXIT_CMN_CMN_CmAmpMap | no |
| SECC initiates CM_AMP_MAP | PICS_CMN_CMN_InitiateCmAmpMap | no |
| Self-initiated wake-up from pause | PIXIT_CMN_CMN_WakeUp < PICS_CMN_CMN_WakeUp | no |
| AC connection-loss handling | PIXIT_SECC_AC_ConnectionLossHandling | n/a (AC-only) |
| AC CP duty cycle after plug-in | PIXIT_SECC_AC_InitialDutyCyle | n/a (AC-only) |
| IEC 61851-1 basic charging (AC) | PIXIT_SECC_IEC61851_1_BasicCharging | n/a (AC-only) |
| Identification modes supported | PICS_CMN_CMN_IdentificationMode | ExternalPayment |
| Certificate services used | PIXIT_EVCC_CMN_CertificateHandling | none |
| Renegotiation supported | PICS_CMN_CMN_Renegotiation | no |
| Pause / resume (sleep mode) supported | PIXIT_EVCC_CMN_Pause | no |
| Optimises the charging profile against sales tariffs | PIXIT_EVCC_CMN_ChargingProfileOptimization | unknown |
| States MaxNumberOfPhasesInUse (AC) | PIXIT_EVCC_AC_MaxNumberOfPhasesInUse | n/a (AC-only) |
| Queries value-added services (ServiceDetail) | PIXIT_EVCC_CMN_VAS | no |
| Transport security requested | PIXIT_EVCC_CMN_TLS | none_ |
| Welding detection performed (DC) | PIXIT_EVCC_DC_WeldingDetection | weldingDetection |
| Reaction to a Pmax=0 W schedule | PICS_EVCC_CMN_PmaxSchedulewithZeroPow | noSleep |
| SLAC validation (CM_VALIDATE / BCB toggle) | PIXIT_EVCC_CMN_CmValidate | unknown |
| AC connection-loss handling | PIXIT_EVCC_AC_ConnectionLossHandling | n/a (AC-only) |
| CM_AMP_MAP supported | PIXIT_CMN_CMN_CmAmpMap | no |
| EV initiates CM_AMP_MAP | PICS_CMN_CMN_InitiateCmAmpMap | no |
Declared by the test operator (profile v1); the test-case selection of this run was derived from this declaration, mirroring the ISO 15118-4 ATS control part ([V2G4-018]/[V2G4-019]). Test cases the declaration marks not applicable were deselected by default; any that were explicitly force-run are annotated “declared N/A (operator force-run)” at their result.
Test families & variants
| ISO 15118-3 SLAC (-5) | DUT (dut) |
|---|---|
| ISO 15118-2 message layer (-4) | DUT (dut) |
| DIN SPEC 70121 DC charging (DIN 70122) | DUT (dut) |
| ISO 15118-20 (ISO 15118-21 ATS) | DUT (dut) |
| PIONIX interop testing (vendor-defined) | DUT (dut) |
Test Environment
| Test suite version | - |
|---|---|
| Test suite git SHA | - |
| Test suite branch | - |
| Mode | HW (CHARGEBRIDGE, BLACK-BOX DUT) |
| Host | CI runner |
| Kernel | 6.8.0-86-generic |
| PLC taps (EVSE / EV) | - / cb_plc_ev |
| MQTT broker | /tmp/everest-conformance-mqtt.sock:1883 |
| EVerest prefix | - |
| Pause between TCs | 3 s |
| EV BSP module id | ev_bsp |
Totals
ISO 15118-3 SLAC (-5)
DUT (dut)
45 pass
3 fail
0 not run
1 inconclusive
ISO 15118-2 message layer (-4)
DUT (dut)
150 pass
0 fail
1 not run
0 inconclusive
DIN SPEC 70121 DC charging (DIN 70122)
DUT (dut)
111 pass
4 fail
0 not run
0 inconclusive
ISO 15118-20 (ISO 15118-21 ATS)
DUT (dut)
123 pass
9 fail
0 not run
0 inconclusive
PIONIX interop testing (vendor-defined)
DUT (dut)
6 pass
0 fail
0 not run
0 inconclusive
Verdict semantics: expected failures (author-flagged known deviations / non-deterministic cases) are reported as FAIL EXPECTED — genuine reds that are not hidden and must be explicitly accepted by the operator. A FAIL (or FAIL EXPECTED) accepted by the operator is reported as ACCEPTED FAIL with the mandatory justification and does not count against the overall verdict. Overall verdict is PASS only if no test case FAILs (or is left FAIL EXPECTED without acceptance) on any variant.